QMobile L101 Pro Flash File Boot Key

QMobile L101 Pro Flash File Boot Key

QMobile L101 Pro Flash File

QMobile L101 Pro Boot Key

QMobile L101 Pro







SCRD mode : AUTO

Operation : Format FileSystem [ v1.02 ]


1. Power off device

3. Insert cable and battery in device!


Wait for device ... 


Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

Port speed : 921600

FDL Flash  : Control transfered!


Boot Done!

Make backup of sensetive data

Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_009E18762905_NVM.nv


Executing FormatFFS ... 

Format FFS Done!


Done!

Elapsed: 00:00:15


Reconnect Power/Cable!


BINARY : Qmobile L101 Pro Flash File SPRD_SPI_WINBOND_W25Q_4MiB_NR_Solution.bin

FLSIZE : 0x00400000

Load Ok!


Operation : Write Flash [ v1.02 ]


1. Power off device

3. Insert cable and battery in device!


Wait for device ... 


Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

Port speed : 921600

FDL Flash  : Control transfered!


Boot Done!



Done!

Elapsed: 00:01:30


Reconnect Power/Cable!








 Connect phone on selected interface...


Core : v2.29 , MTKx FlashEngine : v14.0


Verify files ... 

MAUI : RM-1035_ROM_eMP_10.01.11

VIVA : RM-1035_VIVA_eMP_10.01.11

LANG : RM-1035_LANG_PACK_ROM_IM_eMP_10.01.11_001

CUST : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_10.01.11_001

JMPT : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_10.01.11_001

 - > MODE : FullFlash


Dead Mode is Selected

Waiting for USB device...

1. Phone should be Off!

--- Insert USB cable now! ---

Wait for phone...

Device boot not done

Check Drivers

Try again 


Boot Error

Flashing failed!

Connect phone on selected interface...



Core : v2.29 , MTKx FlashEngine : v14.0


Verify files ... 

MAUI : RM-1035_ROM_eMP_10.01.11

VIVA : RM-1035_VIVA_eMP_10.01.11

LANG : RM-1035_LANG_PACK_ROM_IM_eMP_10.01.11_001

CUST : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_10.01.11_001

JMPT : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_10.01.11_001

 - > MODE : FullFlash


Dead Mode is Selected

Waiting for USB device...

1. Phone should be Off!

--- Insert USB cable now! ---

Wait for phone...

Phone found! [ 9 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6260

BB_CPU_HW : CB00

BB_CPU_SW : 0000

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6260_S0001

BROM Protocol Version : 05

BROM Status : 0000

Comm Status : 0000

Switch to BL done

BL Version : 01

Setting...

Setting done , result code 0x8000

Project ID : CRYSTAL.14.00.11.p1

BROM/BL stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_eMP_Crystal.fg

DA_VERIFY : 00

DA_JUMP   : 00040000

DA_AUTH   : Passed!

DA_CSTAT  : 0x5A

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV

[0] : FLASH_DIE : 00EF 0040 0016 0000 

[0] : FLASH_LEN : 0x00400000

FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000

SecureDecrypt : RM-1035_ROM_eMP_10.01.11

SecureDecrypt : RM-1035_VIVA_eMP_10.01.11

SecureDecrypt : RM-1035_LANG_PACK_ROM_IM_eMP_10.01.11_001

SecureDecrypt : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_10.01.11_001

SecureDecrypt : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_10.01.11_001

OVRLP : 000069B900000001

PHPID : CRYSTAL.14.00.11.p1

OVRLP : 00004DF900000001

DA : FORMAT_BIN

Processing Flash Pre-format

FILES : 5

SAFE_BLOCK : 04

FORMAT_BIN : Ok

WRITE_STYLE : DEF : 0x01 (SEQ)

Write : RM-1035_ROM_eMP_10.01.11

Write : RM-1035_LANG_PACK_ROM_IM_eMP_10.01.11_001

Write : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_10.01.11_001

Write : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_10.01.11_001

Write : RM-1035_VIVA_eMP_10.01.11

CODE_DNLOAD : Ok

[VERIFY] DONE : RM-1035_ROM_eMP_10.01.11

[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IM_eMP_10.01.11_001

[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_10.01.11_001

[VERIFY] DONE : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_10.01.11_001

[VERIFY] DONE : RM-1035_VIVA_eMP_10.01.11

CODE_VERIFY : Ok

Executing FFS FORMAT now...

FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000

DA_RET   : DA_IN_PROGRESS

DA_RET   : FORMAT_DONE

Rebooting phone now


Flashing done!

Total flash time : 00:01:02

Reboot phone Ok


Connect phone on selected interface...



Core : v2.29 , MTKx FlashEngine : v14.0


Verify files ... 

MAUI : RM-1035_CRYSTAL_ROM_eMP_14.00.11

VIVA : RM-1035_CRYSTAL_VIVA_eMP_14.00.11

LANG : RM-1035_CRYSTAL_LANG_PACK_ROM_IC_eMP_14.00.11

CUST : RM-1035_CRYSTAL_CUSTPACK_ROM_IC_eMP_14.00.11

JMPT : RM-1035_CRYSTAL_JUMP_TABLE_IC_eMP_14.00.11

 - > MODE : FullFlash



--- Insert USB cable now! ---

Wait for phone...

Phone found! [ 9 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6260

BB_CPU_HW : CB00

BB_CPU_SW : 0000

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6260_S0001

BROM Protocol Version : 05

BROM Status : 0000

Comm Status : 0000

Switch to BL done

BL Version : 01

Setting...

Setting done , result code 0x8000

Project ID : CRYSTAL.10.01.11.p2

BROM/BL stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_eMP_Crystal.fg

DA_VERIFY : 00

DA_JUMP   : 00040000

DA_AUTH   : Passed!

DA_CSTAT  : 0x5A

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV

[0] : FLASH_DIE : 00EF 0040 0016 0000 

[0] : FLASH_LEN : 0x00400000

FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000

SecureDecrypt : RM-1035_CRYSTAL_ROM_eMP_14.00.11

SecureDecrypt : RM-1035_CRYSTAL_VIVA_eMP_14.00.11

SecureDecrypt : RM-1035_CRYSTAL_LANG_PACK_ROM_IC_eMP_14.00.11

SecureDecrypt : RM-1035_CRYSTAL_CUSTPACK_ROM_IC_eMP_14.00.11

SecureDecrypt : RM-1035_CRYSTAL_JUMP_TABLE_IC_eMP_14.00.11

Executing FFS FORMAT now...

FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000

DA_RET   : DA_IN_PROGRESS

DA_RET   : FORMAT_DONE

OVRLP : 000069B900000001

PHPID : CRYSTAL.10.01.11.p2

OVRLP : 00004DF900000001

DA : FORMAT_BIN

Processing Flash Pre-format

FILES : 5

SAFE_BLOCK : 04

FORMAT_BIN : Ok

WRITE_STYLE : DEF : 0x01 (SEQ)

Write : RM-1035_CRYSTAL_ROM_eMP_14.00.11

Write : RM-1035_CRYSTAL_LANG_PACK_ROM_IC_eMP_14.00.11

Write : RM-1035_CRYSTAL_CUSTPACK_ROM_IC_eMP_14.00.11

Write : RM-1035_CRYSTAL_JUMP_TABLE_IC_eMP_14.00.11

Write : RM-1035_CRYSTAL_VIVA_eMP_14.00.11

CODE_DNLOAD : Ok

[VERIFY] DONE : RM-1035_CRYSTAL_ROM_eMP_14.00.11

[VERIFY] DONE : RM-1035_CRYSTAL_LANG_PACK_ROM_IC_eMP_14.00.11

[VERIFY] DONE : RM-1035_CRYSTAL_CUSTPACK_ROM_IC_eMP_14.00.11

[VERIFY] DONE : RM-1035_CRYSTAL_JUMP_TABLE_IC_eMP_14.00.11

[VERIFY] DONE : RM-1035_CRYSTAL_VIVA_eMP_14.00.11

CODE_VERIFY : Ok


Flashing done!

Total flash time : 00:00:53

Reboot phone Ok




thank you for helping me click on an add

Aapka Shukriya meri madad ke liye ak add per click karen

आपका शुक्रिया मेरी मदद के लिए एक ऐड प्रति क्लिक करें

QMobile L101 Pro Boot Key Is ( 2 )

QMobile L101 Pro Flash File






Post a Comment (0)
Previous Post Next Post